Rules for installing an electricity meter on a pole

16.03.2019 Interesting ideas

The installation of a meter on a pole is a new requirement of electricity suppliers to the owners of private houses, cottages and garden associations. They substantiate this by the simplicity of checking the testimony, without involving residents. However, to remove the meter from the premises, it is required to comply with the established rules for their installation. The cost of the service consists of several components.

Employees of power companies cannot force to produce mounting the meter on a support. They can only recommend, referring to the convenience of checking the testimony and the way to combat theft of electricity. The last word is left to the owner.

Installation Rules

In order for the installation of the device on the pole to be correct and high-quality, you must strictly follow the established rules. Remember them so that during operation of the equipment there are no troubles:

  1. The meter must be installed in a special cabinet that protects the device from moisture and sudden changes in temperature during the off-season.
  2. The column to which you plan to attach the box must have great strength and rigidity.
  3. Insulate or secure the cable to probable areas of damage.
  4. Choose the type of meter that can be installed outdoors.
  5. Apply to the organization for the installation.
On a note!
Protecting the meter from weather is extremely important. If moisture gets in or the temperature drops, the device starts to work intermittently. He incorrectly considers power consumption, often not in favor of the user.

For each model, temperature conditions for correct operation are indicated in the technical data sheet. A cabinet is needed for several reasons:

  • protection of the device from theft and vandals - pick up reliable fastenings and a strong lock;
  • moisture protection;
  • heat protection.

Inspecting the pole to install equipment, check the design for strength and rigidity. In addition, it must be firmly fixed in the ground.

Installation procedure

After the place for installation of the device is agreed with the electricity supplier, you can proceed with the installation of the equipment. Installation must be carried out in accordance with the "Electrical Installation Rules". The interval of the device installation height above ground level should be in the range of 80 to 170 cm. Sometimes it is allowed to install equipment at a height of 40 cm.

It happens that specialists from the energy company attach an electric meter to a pole at a level of more than two meters, explaining this by protection from vandalism. But at this level it will be inconvenient to take readings of the device, first of all, to the owners themselves.

If you have the necessary skills and experience, installation can be done on your own. But it is better to turn to electricians. Installation must be performed in a specific order:

You may be interested in:

  1. Carry out a power outage of the network line in accordance with the established rules.
  2. Install the cabinet and counter at the selected height, securely fastening.
  3. Connect the input circuit of the electric current first to the circuit breaker, and only then directly to the meter.
  4. Provide grounding to protect electrical appliances in the house when a circuit shorts or phase failure occurs.
  5. Connect the planned number of input machines to the output.
  6. Test run to verify installation success.

After completing installation work, you can call the representative of the energy company. He will seal the meter and register it.

Interesting!

Working with electricity requires full compliance with safety regulations, because the safety of people around depends on this. In addition, the correct connection is very important for the proper operation of electrical appliances.

Post installation cost

The installation cost is affected by the experience and qualifications of the master, the cost of materials, the type and complexity of the work. The price of work depends on the technical characteristics:

  • maximum power value;
  • location of the metering station;
  • inclusion type: direct and transformer;
  • the possibility of multi-tariff accounting;
  • the presence in the configuration of a box and automatic machines.

Some performers provide discounts, for example, when ordering several services or a large amount of work. The final cost of electrical work you agree with the master.

Posted by

offline 1 month
Avatar 0
The logo of the Tomathouse.com website. Tips for gardeners

Read also

Garden tools