How to dig potatoes with a walk-behind tractor, a cultivator: advantages

21.01.2018 garden tools

Harvesting potatoes manually requires a lot of time, effort and patience. However, a video of digging potatoes with a walk-behind tractor allows you to make sure that the use of special equipment with the correct settings helps to dig up whole root crops with ease and in the shortest possible time.

Digging potatoes is a must, as it involves harvesting. A video of digging potatoes with a walk-behind tractor confirms that the planned event can be held in the shortest possible time and at a high level.

Digging potatoes with a motoblock

A motoblock using a mounted digger suggests the possibility of a successful harvest. It is intended to use metal rods that bite into the ground and raise the ground with potato tubers. The earth subsequently wakes up between the rods, but the root crops remain on the digging rods.

The quality of the planned work largely depends on the correct configuration of the walk-behind tractor, as the digger must be immersed to a sufficient depth. It is advisable that the digger sink below the tubers that need to be pulled out of the ground. To maintain the integral state of the tubers, digging is carried out through a row. If you know how to dig potatoes with a walk-behind tractor, you can guarantee a quick and successful harvest.

Benefits of digging potatoes by the technique

Gardeners who are just mastering motoblocks are afraid to use the technique for digging potatoes. The main cause of fear is the risk of damage to the crop. In fact, fears have a strong motive, since an improperly tuned walk-behind tractor leads to unwanted cutting of potato fruits. In fact, the use of a walk-behind tractor and a potato digger requires minimal effort, since the attachments are simple in design and you need to correctly adjust the immersion depth taking into account the size of the ripened fruit.

The simplest gardening technique is bent at a minimum angle. When harvesting potatoes, the tilt of the plow is adjusted to the optimum depth of penetration. If you correctly configure the technique, you can easily walk through the garden without the risk of damaging tubers.

Digging potatoes with a walk-behind tractor has the following important advantages:

  • the implementation of the task is greatly simplified, so you can save time and effort;
  • gardening events are expected to be carried out in the shortest possible time;
  • the crop is completely extracted from the earth and losses are minimal.

The correct digging of potatoes using a walk-behind tractor guarantees time and energy savings for each gardener.

How to properly configure the technique

The use of a walk-behind tractor involves the use of a traction mechanism. The speed of harvesting depends on the power of the equipment, but at the same time the basic adjustment is carried out on a tow hitch. The pointed nose of the equipment cuts the soil layer, and then throws the potato tubers on special rods. According to this scheme, the crop can be left on the soil surface.

On the bar of the walk-behind tractor there are always holes with which you can carry out the adjustment of equipment. The trailing mechanism can be placed in different ways, as a result of which the angle of inclination of the nose of the walk-behind tractor changes. If a large slope is expected, the walk-behind tractor can sink deeper into the soil and contribute to the harvest.

 

Important! Harvesting potatoes using a walk-behind tractor requires the right settings, since you need to dig out whole root crops and eliminate problems with passing through the beds.

Experienced models have special devices that allow you to narrow - expand the distance between the wheels of special equipment. This parameter depends on the row spacing. Widely spaced wheels lead to the separation of tubers into parts, as a result of which harvesting is unsuccessful.

You may be interested in:

Types of potato diggers

Factory

Factory motoblocks differ in their execution, as a result of which their successful use is expected. Digging potatoes with a motoblock can be carried out in different ways, so it is advisable to pay attention to the peculiarities of the execution of factory special equipment.

  1. Vibrating view. In this case, the trailed mechanism consists of a ploughshare and a vibrating sieve. A special sieve vibrates when digging potatoes. The ploughshare undermines the soil layer with root crops, after which it steps on a vibrating grid through which the soil wakes up. The crop remains on the grate of the walk-behind tractor, after which it is laid on the ground behind the movement of special equipment. Such a potato digging scheme is effective, but the vibration models have a specific design.
  2. Transporter view. Using this type of technology, it is assumed that the soil is blasted by the ploughshare and enters the conveyor platform, from which the soil and the remains of potato tops fall. Pure root crops remain on the grill with a special hooking device. The conveyor walk-behind tractor is reliable and easy to use.
  3. Arched view. Such motoblocks are the simplest, since there are no moving parts. The equipment has a bayonet shovel, which is mounted on a bar and walk-behind tractor. As a result, the cutting surface should be at a certain angle to the ground. The soil layer is removed. The gap between the rods is ideal for trapping root crops, so efficient harvesting is guaranteed.

The choice of a factory motoblock largely determines the possibility of a successful digging of ripened potatoes.

Homemade

Digging potatoes with a home-made walk-behind tractor is also possible, but you need to create the right technique. It is advisable to use thick and strong iron.

The basis of a home-made walk-behind tractor is a frame that is welded from metal corners and an iron channel. It is planned to manufacture a share from iron plates, which is subsequently screwed to the elevator casing with bolts. Subsequently, metal frames are used to create a cylindrical body. Bushings connected by two metal shafts are inserted into the housing for processing the plot. Sprockets with hubs that are responsible for the movement of special equipment are also located on the key of the motoblock.

Another important point is the manufacture of a drum from roller chains and a rod. The rod is created in the form of a wheel and is connected to chains. To increase the structural strength of the chain, they are fixed on bent discs, which are welded to the discs. The design is mounted on 2 fixed axles.

Then the supporting-conveyor unit is installed. The input axis should be located in the casing on the left side. After that, fix the sprocket with the bearing.

Advice! Independent manufacture of a walk-behind tractor with a potato digger is a complex event that requires technical knowledge and skills. For this reason, it is advisable to buy a ready-made walk-behind tractor with a potato digger.

Reviews

Victor:

“I always dig potatoes with a factory motoblock. A featherfish potato digger is also ideal for digging.If the walk-behind tractor is set up correctly, a successful and quick harvest can be guaranteed. ”

Valentine:

“Digging potatoes with a walk-behind tractor is quick and easy. The most important thing is to properly set up special equipment. If you set the correct parameters, beds and other garbage on the site will not interfere with the harvest. All potatoes can be pulled out of the ground intact. I am pleased that digging potatoes with an ordinary walk-behind tractor is so easy and fast! ”

Ksenia:

“Motoblock can be successfully used for digging potatoes. The most important thing is to carry out the harvest on a cloudy day or in the evening, since it is not recommended to process sufficiently dry soil in hot weather. If you plan the event correctly and successfully set up special equipment, you will be able to collect potatoes quickly and easily. However, an insignificant part of the potatoes will still have to be harvested manually. ”

A video of digging potatoes with a walk-behind tractor allows you to understand how to set up special equipment and how it is easiest to harvest a rich harvest in the shortest possible time and get high-quality root crops.

Posted by

offline 4 months
Avatar 0
The logo of the Tomathouse.com website. Tips for gardeners

Read also

Garden tools